RIGOL Technologies

Welcome, Guest Login

Support Center

PA1011 Power Amplifier Overview

Last Updated: Dec 29, 2015 03:10PM PST
The PA1011 is a USB controlled 10 watts 1 MHz power amplifier. The PA1011 features a ± 10V input and a ± 12 V output.

The PA1011 offers a selection of useful features, such as:
- 10X amplification
- Inverting and non-inverting output
- DC offset
- Storable amplification settings; allowing independent operation

The PA1011 can be controlled through a PC or a compatible function generator such as the Rigol DG1022 or the DG5000 series function-generators
 The PA1000 control software provides a simple to use graphical interface:

 Controlling the PA1011 with the DG1022:
- Connect via USB cable the back port on the PA1011 to the front USB port of the DG1022 (A yellow link light will be observed on the PA1011)
- Press the “Utility” button on the DG1022
- The Utility menu will appear as below
- Press the button corresponding with “PA”

- The Power Amplifier menu will appear on the screen as below: 

PA will be off by default, press the button corresponding with “Swtich” in order to enable the PA output. A output light will now be observed on the PA

- The amplification scale can also be toggled from a default of 1X to 10X.
- The DC offset is adjustable as well through the DG1022 by pressing the OffsOFF button to enable the offset and set it’s value.


Login above for personalized content

Go to RIGOLna.com

License Activation

Firmware Updates

Product Registration

Contact Us

seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
Invalid characters found