RIGOL Technologies

Welcome, Guest Login

Support Center

How long will the DS1000Z Capture a Signal

Last Updated: Apr 03, 2019 04:11PM PDT
To determine how long an oscilloscope will capture a signal when it is operated in single trigger mode is determined by taking the instrument's memory depth and dividing it by the instrument's sample rate.  The memory depth can be changed within the instrument's acquire menu and then the sample rate can be changed by adjusting the horizontal scaling.  The table below lists the different memory depth and sample rate combinations that are possible on the DS1000Z series and lists the length of time the instrument is able of capturing with each possible combination.  

Note that the length of time listed is in seconds and this is for one channel.  
 
  Memory Depth (Points)       Deep Memory Option
Sample Rate (Sa/Sec) 12000 120000 1200000 12000000 24000000
20000 0.6 6 60 600 1200
50000 0.24 2.4 24 240 480
100000 0.12 1.2 12 120 240
200000 0.06 0.6 6 60 120
500000 0.024 0.24 2.4 24 48
1000000 0.012 0.12 1.2 12 24
2000000 0.006 0.06 0.6 6 12
5000000 0.0024 0.024 0.24 2.4 4.8
10000000 0.0012 0.012 0.12 1.2 2.4
25000000 0.00048 0.0048 0.048 0.48 0.96
50000000 0.00024 0.0024 0.024 0.24 0.48
125000000 0.000096 0.00096 0.0096 0.096 0.192
250000000 0.000048 0.00048 0.0048 0.048 0.096
500000000 0.000024 0.00024 0.0024 0.024 0.048
1000000000 0.000012 0.00012 0.0012 0.012 0.024
 
 
Login above for personalized content

RIGOL USA Web Site

f14c465fd642ac49fa5a4bd437615e15@rigol.desk-mail.com
https://cdn.desk.com/
false
desk
Loading
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
about
false
Invalid characters found
/customer/en/portal/articles/autocomplete