RIGOL Technologies

Welcome, Guest Login

Support Center

How to load a List file onto the DSG800 Series

Last Updated: Jul 31, 2019 04:58PM PDT
To load a list file onto the DSG800 series you first have to create a file in excel and then save it as a .CSV file.  See the article "How to Create a List File" for more information about how to format the file.  With the file saved now load the file into a fold on your flashdrive, note that the file is unable to be read if it is in the root directory in the flashdrive.  Then insert the flashdrive into the back of the instrument. 

Next press the Sweep button and then set the Sweep, this can either be frequency, level or frequency and level.  Then set the Type to be list and then set your Mode to either be continuous or single.  Next press the arrow down button on the instrument and press List Sweep and the Load. 

At this point you are presented with the instrument file navigation menu, you will first need to select you flashdrive, it is on the E directory, with this high lighted in blue use the arrows below the rotary encoder to move into the folder, by pressing the right arrow.  Then select your folder, this will also need to be highlighted in blue before pressing the right arrow and then select your file.  Finally to load the file press Recall.  This will cause the instrument to load your file and then start sweeping the list file.  


 
Login above for personalized content

RIGOL USA Web Site

f14c465fd642ac49fa5a4bd437615e15@rigol.desk-mail.com
https://cdn.desk.com/
false
desk
Loading
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
about
false
Invalid characters found
/customer/en/portal/articles/autocomplete