The MSO5000 and the DS7000 series come with a built in Digital voltmeter which can be used at any time. The voltmeter is only meant to be used on the analog channels and will not work on the digital channels.
With the instrument already triggering properly on the signal press “Measure” and then press “Analyze on the right hand side of the display and then “DVM” also on the right hand side of the display. This will bring you to the digital voltmeter menu and allow you to change the channel that the tool is monitoring, along with the mode, and limits of the tool.
In the image below, I set the digital voltmeter to monitor channel 1 of my square wave.
Login above for personalized content
- Post a Public Question
For Assistance in North America:
Call Us @ 877.474.4651
For Assistance in Europe:
Call Us @ +49 (0)89-8941895-01
For Assistance in China:
No.8 Ke Ling Road,
Hi-tech Development Zone,3
For Assistance in Other Countries:
Activate a License